Category Archives: Green Energy

Paul Denison Jacob Joins Free Flow Power Corporation

Free Flow Power Corporation, a developer of clean renewable energy, welcomes the addition of Mr. Paul Denison Jacob to the company as an Executive Vice President of Marketing and Trading.

Mr. Jacob brings 20 years of energy market experience to the company with a track record of driving growth in the asset management, sales, marketing and proprietary trading. Mr. Jacob was most recently, President of Edison Mission Marketing and Trading, a subsidiary of Edison Mission Energy, a leading Independent Power Producer.

Mr. Jacob also brings deep experience in identifying new business opportunities, and building commercial capabilities in energy and related product markets, including the establishment of one of the first independent electricity marketing and trading organizations in the US.

Dan Irvin, CEO of Free Flow Power, commented, “Paul has tremendous experience in critical sectors and the entrepreneurialspirit we value. He will be an important member of our management team focusing ondeveloping our role and offerings in power markets. We are enthusiastic about the immediate impact Paul will make and delightedhe decided to join us.

Mr. Jacob remarked, “I am excited to be a part of the team, and looking forward to contributing to the continued growth of the dynamic platform at Free Flow Power Corporation.

Via EPR Network
More Energy press releases

New Laws Make It Easier To See How Warm New Windows Will Keep The Family

Anyone looking to buy energy-efficient double glazed windows can now quickly and easily compare the ability of different windows to keep in the heat in their homes, by checking the window’s ‘U’ rating.

‘U’ ratings are used in all kinds of building components. They measure how effective that component, for example a window or roof, is at retaining heat.

The new law stipulates that all replacement UPVC double glazing windows must now meet three minimum standards for energy efficiency. The factors which govern this are the efficiency of the glass in the window itself, and that of the sealed units which encase them.

The rule to remember is that the lower the ‘U’ rating, the more efficient the window, and therefore the lower the heat loss.

In many cases, having a double-glazed window containing glass with a low ‘U’ rating installed will be at least as good as opting for a window fitted with triple glazing – but of course, the window units will be no heavier than those with standard double glazing.

“Looking out for the ‘U’ ratings when setting out to buy energy-saving windows is something that everyone should try to do,” said Les Yates of home improvement comparison website Local Quoter. “When anyone is looking to buy energy-efficient windows, it will be one of the key ways of distinguishing between the various window types available.

“It will always be best to choose windows with a lower ‘U’ rating, because they will be proven to be among the best when it comes to keeping the house warm in cold weather.

“As we at Local Quoter only work with reputable and knowledgeable window installers, they will be able to explain the ins and outs of ‘U’ ratings to you. So not only will they use the best quality products available, they will also be able to help you make long-term savings on your energy bills.”

Via EPR Network
More Energy press releases

Local Quoter Helps UK householders Go Green

Local Quoter, one of the UK’s leading online price comparison websites for home improvements, has been doing its bit to help British homeowners make their properties more energy efficient for years.

The company makes sure people across the UK get the best possible prices on energy efficient windows and doors, and now Local Quoter has turned its attention to solar panels.

Being able to produce green energy at home has become a reality for thousands of people following the introduction of the government’s Feed-in Tariffs programme. Solar thermal panels are the perfect answer for anyone who wants to reduce their reliance on fossil fuels and instead harness the power of the sun to help heat their home.

And with 25-year subsidies now available to homeowners who fit photovoltaic panels to their homes, this form of renewable energy has become a serious option for people across the country.

Local Quoter is in a position to help anyone who is considering installing solar panels on the roof of their property. With access to the UK’s leading building specialists, Local Quoter can help ensure householders get a solar PV panels quote that will leave them with a warm feeling!

Les Yates, Marketing Manager at Local Quoter, said: “Low carbon energy generation is the future – and homeowners up and down the country are already enjoying the benefits that installing cheap solar panels can bring.

Via EPR Network
More Energy press releases

Concentrated Solar Power (CSP): Millions of Losses with Wrong Components

According to calculations by DLR (German Aerospace Center) the increase in yield resulting from annealed parabolic mirrors over a period of 25 years amounts to more than seven million Euros. This is based on independent figures and on the company’s practical experience with more than seven million solar mirrors that have been installed in the field for 30 years already.

In the industry it is discussed whether CSP solar mirrors made from tempered or annealed glass achieve a better overall performance. Manufacturers of tempered mirrors advertise lower costs for mirror replacement. This calculation fails to take account however of the higher plant yield that solar mirrors made of annealed glass achieve owing to their better precision collector interception.

The key parameters for the yield of a CSP plant are the bending properties of the mirrors. The basis for assessing the bending properties of a solar mirror is the focus deviation (FDx). This measures the frequency distribution of the real focus deviation in transversal (x) direction of the reflected beam from the ideal focul line of the collector parabola. Consequently, the lower the FDx value, the higher the plant yield. According to the calculations of the DLR each millimetre of decreased scattering loss amounts to an additional plant yield of 11.25 million Euros1 over a period of 25 years.

Based on these data, FLABEG Holding GmbH, the market leader in the field of glass finishing and the leading international manufacturer of solar mirrors has made the following calculation:

Yield and cost summary for a 50 MW plant with 23,000 tubes and 200,000 mirrors

Additional yield due to better precision collector interception (FDx): Annealed + 7,875.000 €1 Tempered 0

Costs for mirror replacements due to glass breakage:
Annealed – 650,000 € Tempered – 42,500 €
Costs for absorber tube replacements due to glass breakage: – Annealed 65,000 €
Tempered 0

Total: Annealed + 7,160.000 € Tempered – 42,500 €

Additional yield of the plant with annealed solar mirrors after 25 years: 7,117,500 €

Bases of calculation:
Average mirror breakage rate: annealed 0.20 %2, tempered 0.01 %3
Average absorber tube breakage rate: annealed 0.025 %2, tempered 0 %3
Precision rate / focus deviation: annealed FDx < 8 mm4, tempered FDx < 8.7 mm3

1Mean values according to calculations by the German Aerospace Center, reference
values: plant capacity 50 MW, period of observation 25 years, nominal glass
thickness 4 mm
2Average values according to KJC/Harper Lake, period of observation 10 years,
nominal glass thickness 4 mm
3Tempered glass manufacturer’s indications
4 Current average focus deviation of FLABEG parabolic solar mirrors

The result shows that during long-term observation, the annealed solar mirrors are markedly more profitable: More than seven million Euros of additional plant yield is achieved over the period of 25 years.

Axel Buchholz, CEO of FLABEG Holding GmbH, is able to confirm this calculation based on independent figures from his own practical experience: “Competitors advertise with extrapolations. In contrast, our solar mirrors have been in the field for 30 years already and have proven their durability and constantly high performance”. Another item of practical experience to be borne in mind: “Glass breakage generally arises only at the corners or edge of a mirror. Tempered glass shatters into a thousand individual pieces in this case, which may result in considerable damage to other components in the field. Our annealed mirrors on the other hand continue to remain operational”.

FLABEG, founded in 1882, is an independent company with 13 facilities in Europe, America and Asia. FLABEG is active in the commercial sectors of automotive mirrors, solar mirrors and technical glass; specializing in all processes of glass finishing. As the pioneer of solar technology with a worldwide network, FLABEG produces mirrors for all CSP-applications – Parabolic Trough, Dishes, Tower and Linear Fresnel. Due to latest coating technologies our solar mirrors are characterized by a reflectivity of more than 95%. FLABEG sets technological standards in terms of the company’s core competencies – bending and coating.

Via EPR Network
More Energy press releases

Kevin Young Joins Free Flow Power Corporation

Free Flow Power Corporation, a hydropower and hydrokinetic renewable energy company, welcomes the addition of Mr. Kevin Young to the company as a Vice President, Project Development.

Mr. Young has 30 years experience in the siting, permitting and licensing of hydroelectric projects throughout the United States and Canada. Mr. Young was a former Senior Vice President and Partner within The Louis Berger Group, Inc. heading their Energy Services Division. While at Berger he managed a hydro contract with the FERC Office of Energy Projects for 12 years. He is an expert in the licensing of conventional hydro, pumped storage and hydrokinetic projects that require licensing by the FERC. Over his career he has worked extensively with the FERC, utilities, and private developers. Through Free Flow Power Mr. Young will continue to offer the consulting services he was recently providing through Young Energy Services.

Dan Irvin, CEO of Free Flow Power, commented, “Kevin has tremendous hydropower experience and the entrepreneurial spirit we value. He will be an important member of our management team focusing on hydro development at existing dams and pumped storage. We are delighted he decided to join us.”

Via EPR Network
More Energy press releases

Uniseal, Inc. To Offer High Performance Adhesives And Sealants To The Solar Power Industry, Improving Service Life, Reliability, And Efficiency

Uniseal, Incorporated has announced it’s entry into the Solar Energy field, with its SolFusionâ„¢ family of adhesives and sealants for Photovoltaic, Concentrated Photovoltaic, and Concentrated Solar Thermal devices and racking systems.

Brandon Willis, Business Development Manger for Renewable Energy, will lead the company’s efforts in bringing advanced products that directly contribute to increased efficiency, improved service life and reliability, and lower cost per watt to the industry.

Randy Zahn, President, stated, “Uniseal is excited to bring its rich history of innovation and unsurpassed quality to the solar industry. Our expertise in the areas of multi-surface bonding adhesion and vapor and moisture sealing along with our state of the art facilities position us well to advance the capabilities of current and future generations of these devices.”

Willis noted that Uniseal’s extensive history in the automotive sector directly translates to their new market focus stating, “Uniseal has been at the forefront of many manufacturing innovations in the automotive industry, helping the OEM’s drive down costs while improving vehicle performance, quality, and safety. Solar firms are looking for similar technical innovations that will help push their technology to the forefront of the industry. We can make a substantial contribution to those goals.”

Uniseal SolFusion™ products are available world-wide. The product line includes solutions for the fabrication, assembly, attachment, and installation of crystalline and thin film photovoltaics as well as concentrating PV and solar thermal devices. The company will exhibit at Solar Power International in Los Angeles, October 12-14, Kentia Hall Booth #5718.

Via EPR Network
More Energy press releases

Scotland Leads EU Partnership Launch of The Good Practice Wind Project is Welcomed By Wind Turbine Manufacturer Gaia-Wind.co.uk

A partnership aimed at the increased opportunity for and construction of both onshore and offshore wind developments has been launched. The Scottish led group of eight EU nations, including Spain, Italy, Greece, Malta, Ireland, Norway, and Belgium, also benefits from the contribution of an additional 17 partners, including academics, local authorities, power companies and consultants.

The partnership hopes to assist the European Union reach its 2020 carbon emission reduction targets on time. Scotland appear to be well placed to advise on such issues, having already reached the halfway point in their own campaign to cut carbon emissions by 42% (a shade higher than other European and US targets) by the beginning of the next decade.

Leading Small Wind Turbine manufacturer Gaia-Wind has welcomed the launch of the Good Practice Wind Project. Managing Director Johnnie Andringa said:

“We particularly welcome the drive to enable communities to play their part in building a renewable energy future. However, with Scottish elections ahead, we must watch out for ‘tinkering politician syndrome’.

“At Gaia-Wind the big technological advances we are developing today will not show up in our products for at least 3 years. A politician changing the rules of the game while we are doing our work would be disastrous.”

The reservations evident in Andringa’s statement regarding the perhaps meddlesome activities of politicians should be allayed somewhat by the apparent determination of Scottish Energy Minister Jim Mather, who launched the partnership, to build upon the renewable energy potential of Europe.

Via EPR Network
More Energy press releases

Wind Turbine Manufacturer Gaia-Wind Welcome The News Of Scottishpower Renewables Wind Farm Expansion

Following news that Scotland are half way to achieving their 2020 climate target, with a 20% drop in carbon emissions since 1990, the announcement of a major expansion to the Whitelee wind farm south of Glasgow provides a reaffirmation of the importance of onshore wind power to Scotland’ s development.

In 2008, Whitelee wind farm on Eaglesham Moor began producing electricity. Currently, the 140 turbines in situ are capable of providing enough energy to power 180,000 homes. With the planned expansion, the power generation of the site will increase from 322MW to a staggering 539MW – enough to power 300,000 homes.

World leading small and domestic turbine manufacturers Gaia-Wind view this development as a highly positive step toward the consolidation and continued progress of the Scottish contribution to a global reduction of greenhouse gas emissions. A Gaia-Wind spokesperson, commenting on Scotland’s latest commitment to renewable energy said that:

“Any onshore wind developments are good news, and with the recent milestone reached in the Scottish climate change agenda, the extension at Whitelee is a further indication of the dedication of the Scottish authorities to producing renewable energy through wind power for a greater proportion of the population.”

Whilst Whitelee exists in its present state as the largest onshore wind farm in Europe, the proposed expansion will elevate the site to one of the largest in the world. Commenting on the monumental nature of the project, UK Director of ScottishPower Renewables, Simon Christian, explained that:

“By itself at 217MW (the expected increase in power generation), the extension would be one of the largest onshore wind farms in the UK, so we are starting another major construction project in Scotland.”

This major project is the latest instance of Scotland’s rigorous and innovatory approach to renewable energy production.

With almost 25% of Scotland’s electricity demand supplied by renewables throughout 2008, it is evident that the Scottish renewable energy sector is playing a leading role in the campaign to reduce emissions. A significant degree of investment from government, businesses, the industry and individual investors has enabled the delivery of vastly reduced carbon emission levels.

Continued investment is a highly significant factor in the field of renewable energy. A spokesperson from Gaia-Wind has in fact commented on the need for “governmental stability in policy making for the continued investment in wind power, and the renewables sector in general.”

Via EPR Network
More Energy press releases

Free Flow Power Acquires Remaining Interest in 10 Ohio Hydroelectric Development Projects

Free Flow Power (FFP) is pleased to announce that it has acquired the remaining assets of Clean River Power, LLC that it had not previously owned. Clean River Power is a run of the river hydroelectric project developer based in Cincinnati, Ohio.

FFPimage.jpg (258×381)

Free Flow Power’s acquisition includes 10 subsidiary LLCs which hold preliminary permits for conventional hydroelectric projects in southeastern Ohio; nine of the projects are located on the Muskingum River and one is on the Scioto River. The projects have a total nameplate capacity of approximately 40 MW and anticipated power production capacity of approximately 250,000 megawatt hours annually. Alan Skelly, Michael Skelly, Sr., and Tim Jones of Clean River Power have joined FFP’s, New Hydro – Project Development, management team.

Alan Skelly has 26 years of experience in private utility law and development, including as past Chief Executive Officer and Managing Director of Clean River Power. Michael Skelly, Sr. has 32 years experience in law, utility and energy project development including as past Treasurer of the Northeast Sustainable Energy Association. Tim Jones has more than 20 years of experience as a Certified Public Accountant with an international full-service accounting firm and as Chief Financial Officer / Controller of various construction and development companies.

Via EPR Network
More Energy press releases

Small Wind Turbine Manufacturer Gaia-Wind Welcomes First Minister’s Drive For World’s First Floating Wind Farm

Domestic wind turbine manufacturer Gaia-Wind supports the Scottish Government’s backing of floating wind farms that will help bring the commercial viability and benefits of wind turbines to an even bigger audience.

Following discussions between First Minister Alex Salmond and Norwegian energy giant Statoil, Scotland could soon become home to the world’s first floating wind farm.

In a bid to encourage Statoil to use Scottish waters to test and develop the commercial viability of their deep water Hywind floating turbines, the First Minister has suggested locations off the coast of Aberdeenshire or the Isle of Lewis.

Scottish waters as a whole are thought to offer a quarter of Europe’s entire offshore renewable potential.

Should the project go ahead, it is estimated that offshore wind power could create around 20,000 jobs, £30 billion in investment as well as a much needed move towards energy security; a point domestic wind turbine manufacturer Gaia-Wind feels is long overdue, as a spokesperson explains:

“With the finite nature of fossil fuels becoming an increasingly pressing matter, we need to act now to create a world that can function just as easily from renewable energy as it does oil.

“The forward thinking nature of the Scottish Government shows the wheels are in motion to do so.

“One of the biggest incentives of large scale renewable energy – such as plans for a floating wind farm – is the idea that Scotland could secure and harness its own energy resources meaning the need to rely on power from other countries could become redundant. The idea of Scotland producing power independently is a very attractive prospect indeed.”

With the Scottish Government backing wind energy all the way, it’s hoped that the increasing prominence of large scale wind farms will also enlighten home owners and small businesses to the benefits of wind turbines on a domestic level.

Via EPR Network
More Energy press releases

ENER-G Pumps Up Sustainable Heating And Cooling Operation

ENER-G has launched a new ENER-G Sustainable Technologies division – specialising in the design, installation and maintenance of heat pumps.

Through its exclusive partnership with four leading manufacturers, the company is providing one of the widest selections of ground source, gas absorption, air source and water loop heat pump technologies in the UK.

The new division expands ENER-G’s existing ground source heat pump operation into a building services focused business that can provide total heat pump solutions for all types of heating and cooling applications utilising heat pumps ranging from 1kW to 1000kW capacity.

ENER-G Sustainable Technologies has relocated its Nottinghamshire base from Ollerton into larger premises in Mansfield, which will accommodate its anticipated year-on-year growth.

Managing Director, Paul Burley said: “Our in-house expertise and resources means we can see the whole job through from initial feasibility through to project handover. We operate our own drilling rigs and offer complete in-house services from specialist design, through to complete project management, installation and maintenance of heat pump technologies. We also have the ability to supply bespoke manufactured heat pumps in a variety of sizes to accommodate complex customer briefs, particularly where space is restricted.”

The introduction of the proposed Renewable Heat Incentive (RHI) in April 2011 is expected to stimulate further demand in the sector, providing significant subsidy payments of up to 7.5 pence per kWh for 15 to 23 years that will dramatically reduce the payback period on ground source and air source heat pump technology.

Via EPR Network
More Energy press releases

San Diego Is ‘Almost’ A Small Wind Community!

DyoCore, a San Diego hybrid small wind/solar manufacturer on Friday July 23rd benefited from a unanimous approval by the County Planning Commission board to adopt changes in permitting to allow for the install and use of small residential/commercial wind turbines. DyoCore’s SolAir is one of the first small wind products to be allowed up to 5 units per structure anywhere under the jurisdiction of the County Planning Commission

DyoCore manufactures the SolAir, a residential / small commercial hybrid wind turbine. This small residential power house can provide about 2,000 kWh’s annually in green renewable power. For the past several years DyoCore has worked diligently in both becoming the first and only residential roof top turbine approved by the CEC (California Energy Commission) and working with municipalities on updating their building codes to allow its communities to take advantage of its technology and the state incentives that make the SolAir almost completely free to purchase and install!

SolAir is the only approved Turbine though the CEC that is virtually free. For each installed SolAir unit the state of California through the CEC, funded by major utilities companies such as San Diego Gas and Electric, will pay you up to 100% of your cost and installation within 4 to 6 weeks of final installation.

David Raine, the founder of DyoCore said “The County Planning Commission of San Diego are not the first to recognize the potential of Small Wind and DyoCore’s power generator in the state of California and not the first in the County as Carlsbad recognized the benefit of these solutions within its community only just a few weeks ago along with several other areas in California that are very friendly to renewable energy and specifically small wind”. David expects other communities to follow in these footsteps very soon but not without an uphill battle.

States and the Federal government in preparation of these new modern green technologies several years ago began adopting and outlining Green energy guidelines but these have and will continue to take time to trickle down to the community level.

Communities have not addressed these types of products since the early 70’s and most current regulations are specific to “Large” pole mounted turbines. DyoCore’s SolAir in most communities doesn’t fit into any building code category. Even though it is light weight, appealing, silent and an easy to install generator at less than 65” tall this is a completely new solution that requires new thinking in how to change existing or implement new codes that allow for modern friendly green technologies.

Via EPR Network
More Energy press releases

Biogas Set To Power Our Homes

Biogas was once the domain of third world countries, but people at build-a-biogas-plant.com show that as energy costs skyrocket and new biogas designs come on the market, even people in a Western city can benefit from a biogas digester.

Biogas Set To Power Our Homes

Biogas is produced when organic matter is broken down by bacteria. The organic matter could be cow dung, but equally it could be the food scraps we throw away every day in our homes. Instead of these scraps going to landfill, they could be put far better use and go into a digester to produce biogas.

The biogas is made up of a large amount of methane, and methane is the important ingredient in biogas. Like natural-gas, biogas can be burned and used to heat water, create lighting or run our cooking stoves and it can even be used to run generators which produce electricity.

“We have been overwhelmed by the response to access the biogas information,” said Simon, a staffer at www.build-a-biogas-plant.com. “Our digester designs cater for individual’s household use, but larger systems are also available for communities, farms and other commercial businesses”.

In the United States alone, billions of tonnes of manure are produced each year by millions of cattle, pigs and chickens. Imagine how much electricity would be produced if all this dung was processed in biogas digesters? Not only would it replace a lot of natural gas but the residue makes a wonderful fertilizer (often better than commercially prepared products).

Via EPR Network
More Energy press releases

Consumers Get Latest Electrical News with Specialist Site Electric.co.uk

Any consumer who wants to keep informed of the latest news from the energy and electrical industries is now able to do so thanks to re-launched website Electric.co.uk. The website is home to all the latest news updates on all the important electricity issues and details on other energy and power sources.

The website is owned and managed by leading web business stable ASAP Ventures and offers consumers news on a manner of energy sectors. The site carries all the very latest news from the electricity industry as well as all sorts of useful tips and hints on ways of cutting domestic power usage and saving energy.

With more people than ever now keen to stay aware of news on energy sources, Electric.co.uk can help them to stay on top of electrical energy news as well as other sources such as wind power, solar power, biomass energy and other renewable powers. The website was introduced by ASAP Ventures a year ago and the company recently re-launched the site with more features to celebrate its first birthday.

Anthony Jackson, spokesperson for Electric.co.uk, comments, “We believe that more people than ever now want to stay informed of all the latest developments in the energy industry, as there are massive environmental and financial implications for people. Our site can help them to remain informed on the latest green and renewable energy resources and all manner of other electric issues.”

For further information please visit www.electric.co.uk

Via EPR Network
More Energy press releases

Global NES of Oregon Helping To Pave A Bright Future!

Global NES of Oregon is a world leader in providing a comprehensive 360 Degree Approach to New Energy Solutions.

Global NES of Oregon specializes in energy efficiencies methodologies and renewable energy technologies powered by clean sustainable solar, wind, hydroelectric and geothermal energy sources. We partner with businesses, governments and industrial clients to identify, design, finance, and build new energy solutions that deliver energy efficiency and take advantage of today’s most innovative renewable energy technologies.

We develop a custom designed system, meeting the energy needs of your company and your community. Renewable Energy solutions deliver long term financial and environmental benefits that are critical for success in today’s demanding markets.

Global NES offers a 360° Approach:
• We listen to our customers in order to fully understand our clients goals and objectives
• We complete an in-depth, state of the art energy evaluation and analysis to determine efficiency, as well as, system options that meet our client’s needs
• We propose and implement energy reduction measures reducing overall energy consumption
• We design and build innovative renewable systems that reduce or eliminate energy expense
• We partner with our clients to deliver financial options and incentives that maximize Return on Investment
• We continue our relationship beyond project completion to ensure a long-term, sustainable solution was delivered

Global NES of Oregon Helping To Pave A Bright Future!

Is Renewable Energy Right For Me?
Renewable energy has a broad-based appeal. The end-line consumer is a homeowner, landlord, retail business owner, farmer, rancher, manufacturer, school, hospital, church, apartment complex owner and virtually anyone who pays a utility bill.

Your motivation:
• Supplementing your energy needs or providing 100% of the power for your location or facility
• Renewable energy offers an opportunity to become self-sufficient
• Revenue generation by selling the energy you produce to tenants or back to the utility providers themselves.
• Reduce your carbon footprint on this planet by reducing emissions and use or dependency on fossil fuels.

No matter what your needs or desires are, we have the solutions for you.

Financing and Incentives
As part of the Global NES 360 Degree Approach, we work closely with our Clients to ensure the right financing options are presented and utilized, as well as our Clients take advantage of all state and federal incentives. The coordination of financing and incentives are critical in delivering a complete project and maximizing Return on Investment.

Financing
Global NES offers a wide variety of financing options including traditional financing packages, lease options and Power Purchase Agreements (PPA). We have an extensive network of financial relationships and partners specializing in financing and investing in renewable energy solutions. Our network includes financing options from the following sources:

• Traditional Financial Institutions
• Leasing Companies
• Investment Banks
• Hedge Funds
• Insurance Companies
• Private Investors
• Venture Capital Firms

Federal and State Incentives
We work closely with our Clients to identify and present the best financial options. We then work hand in hand with our Clients and financing partners to prepare and complete a financial package that maximizes the opportunity for project completion and delivers maximum Return on Investment for our Clients.

There are currently a growing number of local, state and federal incentives designed to help companies develop and expand renewable energy and energy efficiency solutions. These incentives can dramatically help fund or offset project costs, and include some of the following:

• Government and Private Grants
• Clean Renewable Energy Bonds (CREBS)
• Renewable Energy Production Incentive (REPI)
• Favorable Financing Terms
• Rebates
• Tax Incentives and Deductions

With the complexity and rapidly growing number of incentives, it can be overwhelming and challenging to ensure the right incentives are identified and taken advantage of. Global NES works with corporate Clients to make sure all the local, state and federal incentives are identified and fulfilled. These incentives can play a critical role in defining a project’s overall financial outlook, determining cost savings and maximizing Return on Investment.

Energy Efficiency
As part of the Global NES 360° Approach we utilize state of the art technology to analyze and evaluate building infrastructure, systems and processes. Our expert engineering teams identify, design and implement integrated energy reduction solutions that optimize efficiency and maximize savings.

Global NES begins with an in-depth energy analysis and evaluation focusing on building construction, occupancy patterns, mechanical and electrical systems including HVAC and lighting. We design, present and coordinate energy reduction measures that improve facility efficiency, reduce operating cost and maximize shareholder value.

Benefits of Energy Reduction Measures
• Reduce operating expenses and improve cash flow by dramatically reducing energy/utility consumptions
• Identify and reduce energy waste
• Capitalize on federal tax deductions and other government incentives
• Increase the value of your facility
• Decrease maintenance time and costs
• Secure favorable interest rates and terms through Green Financing Options
• Make a positive contribution to the environment by reducing your carbon foot print and greenhouse gas emissions

Global NES also partners with our Clients to ensure maximum Return on Investment by identifying and coordinating favorable financing options and ensuring Clients take advantage of all possible rebates, grants and tax incentives. Please Feel Free To Contact Us For More Information, Or To Schedule Your Free Energy Analysis.

Via EPR Network
More Energy press releases

npower Welcomes Cash Rewards For Low Carbon Electricity And Heating

npower has welcomed the Government’s announcement regarding Feed-in-Tariff (FIT) levels and urged consumers to buy now to take advantage of the Government scheme.

The scheme offers financial assistance when installing solar PV panels, potentially earning customers £986 per year.

Julia Lynch-Williams, Director of Energy Services for npower, commented: “According to Government calculations, consumers generating their own electricity from solar PV panels could earn approximately £986 per year from tax free generation payments and bill savings combined.

“The new Feed-in-Tariff arrangement means homeowners have the opportunity to earn more than ever before from generating their own electricity and together with a grant, solar is certainly a more attractive investment than it’s ever been. Given that the Government has increased generation levels since the consultation in July, now definitely looks to be the best time to buy.”

With a typical installation costing around £12,000, FITs will see the payback period considerably reduced.

npower has seen enquiries in solar panels increase by 200 per cent since the Feed-in-Tariffs were first announced in July 2009, and expects this trend to continue.

To help homeowners take advantage of FITs, npower solar offers a complete ‘one-stop-shop’ service including site survey, grant application support, installation and buy back of excess energy.

npower’s website includes guidance for homeowners on solar installations, including a suitability calculator which tells homeowners whether their property is suitable for solar installations and offers a free estimate for installation.

Via EPR Network
More Energy press releases

EnergieVair Offers Wind Turbines, Solar Panels, Inverters And All You Will Need For Your Renewable Energy System

EnergieVair (www.energievair.com) is one of the world’s leader in the industrial sector of Renewable Energies. It is a compagny based in Canada that supply, install and make the promotion of Renewable Energies, all over the world. The new year 2010 seems very promissing for EnergieVair that can now count on new distributors in Europe and Africa. Also, they’ve just published, on the 1st of jan. 2010, their new website, all refreshed with new shopping kart options and many more interesting products. From now on, you can also read other buyer’s review and feedback about the product you are about to purchase. Be sure to do it the right way!

EnergieVair now offers an even wider variety of vertical axis wind turbines (VAWT), from more than 4 design that will match your needs, even if you are in low-wind zones or urban locations. EnergieVair also offers horizontal axis wind turbines (HAWT), for gust-wind regions. Want to maximize your system’s efficiency? We suggest hybrid installations using Solar Panels and Wind Turbines.

Maybe you are far away from Canada? Dont worry, EnergieVair ships worldwide and they’ll find an affordable way for the goods to reach you. All of their products (Solar Panels, Wind Turbines, Regulators, Inverters, Converters, etc.) are under warranty for long-term periode, to assure you a constant input of electricity, and a peace of mind.

If you are off the grid, without electricity, you will probably need an independant system, using batteries. If you are already connected to the grid, you would probably like to lower your electric bills by connecting your Wind Turbine or Solar Panels directly to the grid, without batteries. This is the easiest and most affordable way to do it! No matter what system you need, EnergieVair will help you! Come and visit their new website and see by yourself the wide choice of good quality Renewable Energy products, at very low prices. If you are not sure yet, contact their friendly customer’s service for an immediat consultation, assistance or advise. You will get a reply withing 48 hours.

The cost for traditional and polluting energy sources are rising. On the other hand, the cost for Renewable and green Energies are falling. It is now more possible than ever to live in respect with the environment and save some electric fees. Whatever you want to do, you can do it NOW! Wired in parallel with the public electricity (grid), as an independent electric system, as an emergency power supply, to electrify a camp, a boat or a RV, or even to heat a place, with EnergieVair, the possibilities are INFINITE!

Via EPR Network
More Energy press releases

Bristan Makes Showering Green Again

Showers have long been promoted as more water and energy efficient than baths. However many modern shower systems use more water than consumers expect. According to the environment agency, a power shower can use over 60l of water in 5 minutes compared to 70l for a standard bath. Add to this the fact that many users stay in the shower far longer than 5 minutes or have more than 1 shower per day and the green credentials of showering look rather shaky.

The good news is Bristan has extended it’s ecosmart range of water efficient products with the launch of a new Bristan Eco shower handset model No. HAND100 ECO C.

Offering excellent value for money the stylish single function handset features a built-in flow limiter that instantly reduces water usage to six litres per minute. It can be fitted with any shower hose to deliver significant water savings while still allowing for an enjoyable showering experience. Available in chrome, the eco handset features rub clean nozzles for easy cleaning.

Quote from ‘Heating & Plumbing Monthly Nov 2009’

Judith Gibbons, head of marketing at Bristan, said:

“Greater awareness of the potential problem of water shortage is driving more people to think about how they can be more water efficient in the home. Our ecosmart range has been developed to make saving water as easy as possible for consumers and, as heating water accounts for around 25% of our energy bills, the range can help people save money too.”

GW Supplies (Gurney & White Ltd)  not only stock the Bristan ecosmart range of Taps, Showers and Flow Limiters but also sell similar products from ‘DEVA’ and ‘House of Ultra’. Visit their web site at www.gwsupplies.co.uk to see the ranges of modern, stylish products that will not only enhance the look of a bathroom but will also save  money by saving water and energy thus reducing the household’s carbon footprint.

Via EPR Network
More Energy press releases

Concentration:FLABEG pools Know-How

FLABEG, the international glass finishing specialist, now provides its customers with even more transparency. With the formation of FLABEG Deutschland GmbH the company will concentrate its key competences in the field of automotive and technical glass, in future FLABEG GmbH will focus simultaneously on the development of the solar mirror business.

“The significant expansion of our worldwide business locations made it necessary to re-organize our key competences,” said Axel Buchholz, CEO of the FLABEG Group, explaining the new structure. The automotive and technical glass divisions will operate under the umbrella of FLABEG Deutschland GmbH. The mission: to create a powerful, flexible center of competence for partners in the automotive, consumer electronics and aerospace industries.

For FLABEG customers the pooling of expertise in the solar mirror business and the automotive, technical glass has distinct advantages. FLABEG provides its partners from consulting to support up to the individual precision solution all from one source. “Even with expansion, it is important for us to retain the flexibility and structure of a medium-sized company,” said Axel Buchholz. “Utilizing the concentrated development expertise of our all locations, we are able to produce tailor-made high-tech glass products for our customers in a timely manner. A key competitive advantage for FLABEG customers.”

FLABEG, founded in 1882, is an independent company with production facilities in Europe, America and Asia. FLABEG is an expert in all types of glass processing. Precision bending and coating are among the core competencies of the company.

Via EPR Network
More Energy press releases

20% Of The Cost Of Most Domestic Electricity Bills Is From Lighting

Although energy-saving light bulbs are more expensive to buy than ordinary bulbs they can last up to 15 times longer, depending on the type of the bulb you buy.

Changing saves energy and thus money.

The November 2009 ©Which? report on Megaman® GSU111d 11w Dimmerable® (fully dimmable with standard dimmers) had this to say:

“Test score 75%. Megaman® GSU111d Dimmerable® Warm White 11W.

Pros. One of the best bulbs for starting up, this one produces a good amount of light quickly and light output meets the manufacturer’s claim. It lasts well, too – we test bulbs for up to 8,000 hours, and every one of the Megaman® bulbs lasted the duration. It handles frequent switching on and off well and can be used with dimmer switches.”

With many traditional light bulbs disappearing from the shops for good, now is the time to change to more energy-efficient lamps & bulbs.

In September the phase out of traditional bulbs started with 100w clear and most pearl/frosted wattages being discontinued, all others will go over the next few years.

The humble light bulb is dead….. to be replaced by more efficient lighting such as compact fluorescent lamps — known as CFLs, or energy-saving light bulbs.

This has caused a lot of consumer concerns. Gurney & White Ltd, stockist of Megaman energy efficient light bulbs, have provided answers to the most frequently asked questions:

Q. For how long will I be able to buy ordinary bulbs?

A. 75W clear bulbs will be phased out from 1 September 2010, 60W clear bulbs from 1 September 2011, and all remaining clear bulbs from 1 September 2012.”

Q. Can I get energy-saving bulbs in different shapes?

A. Yes. You can get a variety of shapes including globe, golf ball, twisted and candle shapes.

Q. Do low-energy bulbs start at full brightness or do they need to warm up?

A. Some bulbs produce more than 40% of their claimed light output within the first few seconds, but others take longer to warm up. Megaman Dimmerable lamps have a quick start-up.

Q. Where can I dispose of low-energy light bulbs?

A. Compact fluorescent lamps contain a small amount of mercury, which is a hazardous material, so they must not be thrown in your domestic rubbish bin. You can dispose of used bulbs at more than 90% of civil amenity sites.

GW supplies has a wide range of energy saving bulbs and because they can buy in bulk they can offer excellent prices.

Via EPR Network
More Energy press releases